bitnamicharts/odoo repository overview

⁠Bitnami Secure Images Helm chart for Odoo

Odoo is an open source ERP and CRM platform, formerly known as OpenERP, that can connect a wide variety of business operations such as sales, supply chain, finance, and project management.

Overview of Odoo⁠

Trademarks: This software listing is packaged by Bitnami. The respective trademarks mentioned in the offering are owned by the respective companies, and use of them does not imply any affiliation or endorsement.

⁠ TL;DR

helm install my-release oci://REGISTRY_NAME/REPOSITORY_NAME/odoo

⁠ Introduction

This chart bootstraps a Odoo⁠ deployment on a Kubernetes⁠ cluster using the Helm⁠ package manager.

Odoo Apps can be used as stand-alone applications, but they also integrate seamlessly so you get a full-featured Open Source ERP when you install several Apps.

⁠ Before you begin

• Kubernetes 1.23+
• Helm 3.8.0+
• PV provisioner support in the underlying infrastructure
• ReadWriteMany volumes for deployment scaling

⁠ Installing the Chart

To install the chart with the release name my-release:

helm install my-release oci://REGISTRY_NAME/REPOSITORY_NAME/odoo

The command deploys Odoo on the Kubernetes cluster in the default configuration. The Parameters⁠ section lists the parameters that can be configured during installation.

⁠ Configuration and installation details

This section describes credentials, configuration, and other installation options.

⁠ Resource requests and limits

Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the resources value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.

To make this process easier, the chart contains the resourcesPreset values, which automatically sets the resources section according to different presets. Check these presets in the bitnami/common chart⁠. However, in production workloads using resourcesPreset is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the official Kubernetes documentation⁠.

⁠ Rolling VS Immutable tags⁠

It is strongly recommended to use immutable tags in a production environment. This ensures your deployment does not change automatically if the same tag is updated with a different image.

Bitnami will release a new chart updating its containers if a new version of the main container, significant changes, or critical vulnerabilities exist.

⁠ Update credentials

Bitnami charts configure credentials at first boot. Any further change in the secrets or credentials require manual intervention. Follow these instructions:

• Update the user password following the upstream documentation⁠
• Update the password secret with the new values (replace the SECRET_NAME, PASSWORD and SMTP_PASSWORD placeholders)

kubectl create secret generic SECRET_NAME --from-literal=odoo-password=PASSWORD --from-literal=smtp-password=SMTP_PASSWORD --dry-run -o yaml | kubectl apply -f -

⁠ Use a different Odoo version

To modify the application version used in this chart, specify a different version of the image using the image.tag parameter and/or a different repository using the image.repository parameter.

⁠ Using an external database

Sometimes you may want to have Odoo connect to an external database rather than installing one inside your cluster, e.g. to use a managed database service, or use a single database server for all your applications. To do this, the chart allows you to specify credentials for an external database under the externalDatabase parameter⁠. You should also disable the PostgreSQL installation with the postgresql.enabled option. For example using the following parameters:

postgresql.enabled=false
externalDatabase.host=myexternalhost
externalDatabase.user=myuser
externalDatabase.password=mypassword
externalDatabase.port=3306

Note also if you disable PostgreSQL per above you MUST supply values for the externalDatabase connection.

⁠ Gateway API

This chart provides support for exposing Odoo using the Gateway API⁠ and its HTTPRoute resource. If you have a Gateway controller installed on your cluster, such as APISIX, Contour, Envoy Gateway, NGINX Gateway Fabric or Kong Ingress Controller you can utilize the Gateway controller to serve your application. To enable Gateway API integration, set httpRoute.enabled to true. The Gateway to be used can be customized by setting the httpRoute.parentRefs parameter. By default, it will reference a Gateway named gateway in the same namespace as the release.

You can specify the list of hostnames to be mapped to the deployment using the httpRoute.hostnames parameter. Additionally, you can customize the rules used to route the traffic to the service by modifying the httpRoute.matches and httpRoute.filters parameters or adding new rules using the httpRoute.extraRules parameter.

⁠ Ingress

This chart provides support for Ingress resources. If you have an ingress controller installed on your cluster, such as NGINX Ingress Controller or Contour you can utilize the ingress controller to serve your application. To enable Ingress integration, set ingress.enabled to true.

The most common scenario is to have one host name mapped to the deployment. In this case, the ingress.hostname property can be used to set the host name. The ingress.tls parameter can be used to add the TLS configuration for this host.

However, it is also possible to have more than one host. To facilitate this, the ingress.extraHosts parameter (if available) can be set with the host names specified as an array. The ingress.extraTLS parameter (if available) can also be used to add the TLS configuration for extra hosts.

Adding the TLS parameter (where available) will cause the chart to generate HTTPS URLs, and the application will be available on port 443. The actual TLS secrets do not have to be generated by this chart. However, if TLS is enabled, the Ingress record will not work until the TLS secret exists.

Learn more about Ingress controllers⁠.

⁠ Sidecars and Init Containers

If you have a need for additional containers to run within the same pod as Odoo, you can do so via the sidecars config parameter. Simply define your container according to the Kubernetes container spec.

sidecars:
  - name: your-image-name
    image: your-image
    imagePullPolicy: Always
    ports:
      - name: portname
       containerPort: 1234

Similarly, you can add extra init containers using the initContainers parameter.

⁠ Setting Pod's affinity

This chart allows you to set your custom affinity using the affinity parameter. Find more information about Pod's affinity in the kubernetes documentation⁠.

As an alternative, you can use of the preset configurations for pod affinity, pod anti-affinity, and node affinity available at the bitnami/common⁠ chart. To do so, set the podAffinityPreset, podAntiAffinityPreset, or nodeAffinityPreset parameters.

⁠ Backup and restore

To back up and restore Helm chart deployments on Kubernetes, you need to back up the persistent volumes from the source deployment and attach them to a new deployment using Velero⁠, a Kubernetes backup/restore tool. Find the instructions for using Velero in this guide⁠.

⁠ FIPS parameters

The FIPS parameters only have effect if you are using images from the Bitnami Secure Images catalog⁠.

For more information on this new feature, please refer to the FIPS Compliance section⁠.

⁠ Persistence

The Bitnami Odoo⁠ image stores the Odoo data and configurations at the /bitnami/odoo path of the container.

Persistent Volume Claims are used to keep the data across deployments. This is known to work in GCE, AWS, and minikube. See the Parameters⁠ section to configure the PVC or to disable persistence.

⁠ Parameters

The following subsections list global, common, and component-specific parameters.

⁠ Global parameters

⁠ Common parameters

⁠ Odoo Configuration parameters

⁠ Odoo deployment parameters

Note: the README for this chart is longer than the DockerHub length limit of 25000, so it has been trimmed. The full README can be found at https://techdocs.broadcom.com/us/en/vmware-tanzu/bitnami-secure-images/bitnami-secure-images/services/bsi-app-doc/apps-charts-odoo-index.html⁠